This product has been discontinued.

The low-friction LOFRI-DIY product is a set of high-tech glue-on soles that can be attached to the existing soles of most dance shoes, street shoes, and exercise shoes, to optimize the shoes' friction characteristics for dancing. LOFRI-DIY soles allow dancers to pivot with ease on sticky (e.g., nightclubs, dance bars) or high-friction dance floors. Virtually all floors that are not studio-quality wood floors are high-friction floors.

• The components of the LOFRI-DIY kit do not have adhesive backing. They need to be glued on to the shoes with the included Super Glue Gel or contact cement (not included), such as Barge Cement, or any other contact cement available at hardware stores.
• Since Superglue Gel and contact cement are much stronger than even the industrial-strength double-sided adhesive provided with our other kits, LOFRI-DIY can be glued to and will stay on shoes with aggressive (knobby) profile soles, such as running and fitness shoes.
• After gluing LOFRI-DIY components onto the shoe with Superglue Gel or contact cement, they cannot be removed again, whereas the LOFRI-04 components can be removed without damaging the shoes.
• The edges of the large disks and the toe patches of the LOFRI-DIY kit that will be in contact with the floor should be beveled (in non- technical lingo: rounded or sloped) so they don't catch in ridges of tiled floors or other uneven floor features. This can be done with the included sand paper.

No technical skills are needed, customer only needs to follow the included detailed instructions.
No tools are needed, although the availability and use of clamps would be helpful.

This product has been discontinued.

Available Discounts:

Click on the View Quantity Discounts button near the top right corner of this page to see the price for quantities of this product larger than one unit.

For all other business information, please visit our store's home page.

What's included:

There are 10 parts in the LOFRI-DIY kit:

• 2x large low-friction plastic disks
• 2x small high-friction disks
• 2x low-friction plastic toe patches
• 2x additional low-friction plastic toe patches. Use these as replacements if your toe patches wear out. Or, you can attach them next to the large disks, on shoes that are much wider than the large disks.
• 1x small tube of Superglue Gel.
• 1x small sheet of sand paper for beveling the edges and for roughing the surfaces that will be in contact with the floor.
• Detailed instructions on two color pages on how to attach and use the LOFRI-DIY components.

Links to explanatory pages about this product:

If you were sent to this page directly from a search engine, we recommend that you inform yourself about the unique advantages of Soles2dance on our Home Page and consult our Product Selector, to find out which Soles2dance products will best match the floors you want to dance on.

Home page - unique advantages of Soles2dance

Product Selector - which Soles2dance product to chose for different floors and different shoes

Warning:

This product is intended to reduce friction of dance shoes on certain floors, such as sticky dance floors in nightclubs or generally most non-wood floors. While most dancers will find this property desirable, the risk of slipping and falling on any floor increases when using this product. Dancers should especially avoid walking on wet or slippery floors when using this product.