Home > Suede Sheets >

SUEDE-DIY-20pk - Pack of TWENTY suede sheets with industrial-strength adhesive backing, 8.5 in x 12 in (21.6 cm x 30.5 cm) in light tan
Suede sheet with industrial-strength adhesive backing

Everyday Low Price: $329.90

Product Code: SUEDE-DIY-20PK

Choose Your Color


SUEDE-DIY-20pk is a pack of twenty sheets of premium suede in light-tan color, each sheet of size 8.5 in x 12 in (21.6 cm x 30.5 cm) with a thickness of 3/64 inch (1.2 mm). The sheets have a backing of 3M industrial-strength double-sided adhesive, the strongest double-sided adhesive available. The adhesive adheres strongly to leather, most rubber compounds, Nylon, ABS, and Kydex.

After cutting the suede sheet to size, you only have to peel off the protective liner of the adhesive backing and stick the cut piece on. While you can buy sheets of suede at crafts stores, those suede sheets require you to glue the cut pieces on with a liquid glue -- a messy, tricky, and time-consuming procedure. SUEDE-DIY sheets can be cut with good household scissors or utility knives.

Twenty sheets of premium suede with industrial-strength adhesive backing
  • Color: light-tan
  • Dimensions of each sheet approximately: 8.5 in x 12 in (21.6 cm x 30.5 cm)
  • Thickness: Approximately 3/64 inch (1.2 mm)

Related items

  • We offer packs of single sheets in a larger variety of colors, as well as 2-packs and a 3-packs of these sheets in colors black, light tan, and gold tan.
  • We offer readily cut, adhesive-backed suede soles for flat shoes as well as high-heeled shoes. Please check our selection of pre-cut soles here.

See details on shipping here or click on "SHIPPING" on the left.

For all other business information, please visit our store's home page.


This product works very well for replacing the main sole of either flat or high-heeled shoes as those soles present a relatively large area for the adhesive to adhere to. The product also works well for covering the heel of a flat shoe, e.g., sneakers or men's dance shoes. However, the product is not meant to cover the heel tip of high-heeled ladies' shoes, because high heels typically have narrow bottoms, which present only a small surface area for the adhesive of the suede sheet. As a simple rule of thumb: In order for the adhesive backing of the suede sheet to stay on securely, there should be a contact area that is at least equivalent to the area of a 2-inch diameter circle. If you want to cover a high, narrow heel, consider buying a piece of our very cheap SUEDE-SCRAP together with our Superglue Gel, SUGLU. Superglue is much stronger than even the industrial-strength 3M 300LSE double-sided adhesive used as the backing for our suede sheets and suede soles.

Share your knowledge of this product. Be the first to write a review »