• Ten sheets of 3M 9474LE 300LSE double-sided adhesive of size 24" x 36" (612 mm x 918 mm).
  

Shipping:

• This item is not eligible for free shipping.
• This item cannot be shipped to International (non-U.S.) shipping addresses. If we receive an order with an international shipping address, we cancel the order and refund the purchase price.
  
• You can also provide us with your own UPS or FedEx shipping account information prior to placing an order. After you provided us with your own shipping account information, you can purchase this item and chose the following shipping option, which becomes available during checkout: "Too heavy for regular shipping options - contact us for quote."
• With packaging material, this item weighs an estimated 6 pounds and the package is about 26" x 38" x 3" in size.

Why 9474LE is the best 300LSE-based double-sided adhesive

3M 9474LE is hands-down 3M's best double-sided 300LSE adhesive, and here is why. Simpler versions of double-sided adhesive based on 300LSE (e.g., 3M's 8153LE) have three layers: two protective liners, and sandwiched between them, the 300LSE adhesive. The problem with all versions offered with this 3-layer design is that when cutting these sheets with scissors or knifes, a small amount of the adhesive oozes out between the two liners and sticks to the sides of the liners, along the cut. Then, when trying to peel off a liner, that liner will stick to the opposite liner, making it impossible to separate the liners cleanly. In contrast, the sophisticated 9474LE product is constructed with five layers, as shown in Fig. 2, above. Here, an ultrathin, so-called "carrier" is sandwiched between two layers of 300LSE adhesive, thereby stabilizing the adhesive and preventing it from oozing out when being cut. As a result, the sheets of 3M 9474LE offered in this listing here can be cut with utility knifes or scissors and the liners will separate cleanly without sticking together. If you ever went through the frustrating experience of cutting simpler versions of 300LSE-based double-sided adhesives, you will appreciate the value of the 9474LE product. We here at Soles2dance certainly appreciate the benefits of 3M 9474LE and we use this sophisticated product for our own fabrication needs, even though it is more expensive than simpler versions.

3M offers other double-coated** adhesive transfer tapes with the same 5-layer construction as that of 9474LE. However, in these other products the adhesive layers on each side the carrier are not the same. For example, 3M 9490LE uses 300MP adhesive on the faceside and 300LSE adhesive on the backside. This is good for specific applications in the auto industry, but most of our customers will prefer 300LSE on both sides, and the product offered here is the only such version available as sheets. Also, in small quantities of a few sheets and in small sizes (smaller than 24"x36"), this product is available only from us; take our word for it, it will save you a lot of time.

Other notes

* "double-linered" means that the product is provided with liners (protective foils) on the front and back. This is different from products fabricated in the form of rolls: those have only one liner and are thus not suitable for marketing in sheet-format.